P-16 Rescue Tool
Powerhead Output Torque 72,000 in-lbs (8135 N-m)
Input / Output Ratio 5958:1
Powerhead Articulation Angle 70°
Attachment Pins: High-strength steel, ball-detent
Motor Inrush Current 220 Amps
Motor Current @ No Load 23 Amps
Motor Current @ Max. Load 155 Amps
Pigtail Cable Length 12” (305 mm)
With No Attachments
Weight 32 lbs (14.5 kg)
Envelope (LxWxH)
17” x 10” x 12” (432 x 254 x 305 mm3)
With S-1601 Spreaders Attached
Spreading Force (1” from tip)
8,000 to 11,000 lbs
(35.6 – 48.9 kN)
Spreading Force (At back of arm)
17,530 to 45,240 lbs
(78.0 – 201.2 kN)
Weight 41 lbs (18.6 kg)
Envelope (LxWxH)
25” x 10” x 12”
(635 x 254 x 305 mm3)
Opening Distance 14” (356 mm)
With C-1601 Curved Cutter Attached
Cutting Force (at blade center)
30,000+ lbs (133.4 kN)
Weight 44 lbs (19.9 kg)
Envelope (LxWxH) 24” x 10” x 12”
(610 x 254 x 305 mm3)
Opening Distance 5” (127 mm)
With CS-1602 Straight Cutter Attached
Cutting Force (at notch) 45,000+ lbs (200 kN)
Cutting Force (at blade center) 21,000+ lbs (93.4 kN)
Spreading Force 10,000 to 18,000 lbs
(44.5 – 80.1 kN)
Weight 47.5 lbs (21.5 kg)
Envelope (LxWxH) 27” x 10” x 12”
(686 x 254 x 305 mm3)
Opening Distance 10” (254 mm)
PC-100 Controller Unit
Power Input 12 Volts DC
Case Sealed
Weight 5.6 lbs (2.5 kg)
Envelope (LxWxH) 11” x 4.5” x 7.5”
(279 x 114 x 190 mm3)
CA-4M Power Cable Assembly
Cable Length 13 ft (4 m)
Weight 6.8 lbs (3.1 kg)
PWR-3X12 Power Pack
Battery Type 12V, Valve-Reg., Sealed Lead-Acid
Battery Capacity 33Ampere Hour
Case Fully Vented
Charge Indicator 5 LEDs with test button
Power Connectors 2 high amp, 1 low amp
Weight:33 lbs (15.0 kg)
Envelope (LxWxH)
12” x 6.5” x 15.5”
(305 x 178 x 368 mm3)
2C0516-1 Ram Coupling
Connects Power Pushers and
Extensions. Weight: 6 lbs (2.7 kg)
POWER PUSHER® Rams & Extensions
P-40 Power Pusher Ram
Fully Extended Length 41 in. (104.1 cm)
Fully Retracted length 23 in.(58.4 cm)
Stroke Length 12 in.(30.5 cm)
Adjustment Length 6 in.(15.2 cm)
Housing Slot Width 2.25 in(5.7 cm)
Weight 36 lbs.(16.3 kg)
P-25 Power Pusher Ram
Fully Extended Length 27 in.(68.6 cm)
Fully Retracted length 16 in.(40.6 cm)
Stroke Length 5 in.(12.7 cm)
Adjustment Length 6 in.(15.2 cm)
Housing Slot Width 2.25 in(5.7 cm)
Weight 27 lbs.(12.2 kg)
E-24 Ram Extension
Length 24 in. (61.0 cm)
Weight with handle 15 lbs (6.8 kg)
E-48 Ram Extension
Length 48 in. (121.9 cm)
Weight with handle 30 lbs (13.6 kg)
2C0551-1 Swivel Base Set
Attach to Rams/Extensions for angled operations.
Weight: 13 lbs (5.9 kg)
Saw Extrication Kits
SZA-1015 Kit includes Milwaukee Cordless Sawzall, Power Adapter, 16 Ft. Power Cable, 5 Torch Blades, 1 Ax Blade, Contractors Bag. Weight: 18 lbs. (8.2 kg)
SZK-2000 Kit adds Milwaukee 6.5” Circular Saw, Metal Cutting Blade and Power Adapter. Weight: 25 lbs (11.3 kg)
JC4-16 Jumper Cables
16 Ft. 4 Ga. Red connector one end, Heavy-duty clamps other end.
EC4-16 Extension Cable
16 Ft. 4 Ga. Red connector both ends
BKPK-100 Back Pack
Back pack for Power Pack. Weight: 5 lbs. (2.3 kg)
LB-1204 Flood Light
50 Watts, 3.9 Amps, 4” Dia. Halogen bulb. On/Off switch
BC-U1 Battery Charger
Input Voltage & Freq. 90-230 V AC, 50-60 Hz
Max. Output Current 4 A ± 5%
Max. Output Voltage 14.8 ± .20 V DC
Weight 2.4 lbs (1.1 kg)
Envelope (LxWxH) 6.8” x 4.2” x 2”
(172 x 107 x 51 mm3)
Downloads : CY-2飓风套装.pdf
CY‐2 Kit includes:
P‐16 | Rescue Tool |
AP‐1600 | Attachment Pins |
S‐1601 | Spreader Arms |
C‐1601 | Curved Cutter |
CS‐1602 | Power Blade |
CA‐4M | Power Cable |
PC‐100 | Controller Unit |
PWR‐3X12 | Power Pack (QTY‐2) |
BC‐U1 | Battery Charger |
JC4‐16 | Jumper Cables, 16 Ft. |
P‐40 | Power Pusher Ram, 40” (QTY‐2) |
2C0516‐1 | Coupling, Ram |
LB‐1204 | Flood Light |
EC4‐16 | Extension Cable, 16 Ft. |